FREE LOCAL DELIVERY 
K4 U/C Sanitiser – 2 ltr
SKU: KK4
$ 109.52
8 in stock
Description
Ultra Concentrate.
No rinse surface sanitiser for food processing and food service sectors. Designed to be either diluted through dilution control equipment or via the use of a multi-dose wall mounted unit.
DIRECTIONS
Before sanitising ensure all surface are cleaned with suitable detergent. Dilute with cold potable water into a clean applicator bottle.
No-rinse application:
This product may be used as a no-rinse sanitiser on clean hard surfaces. Before use, all edible product and packaging material must be removed from the room or carefully protected. After use, a rinse with potable water is not required but food contact surfaces must be thoroughly drained / dried to minimise residues. For hard surfaces and equipment to ensure 300ppm use at the ratio of 1:250 (4ml per litre). Apply by spray or clean cloth, Allow contact time of minimum 10 minutes.
Rinse applications:
Use at the ratio of 1:200 (5ml per litre, 400ppm). Apply in a manner that avoids food contamination. Allow contact time of 10 minutes minimum then rinse with clean, potable water.
Foot bath:
Dilute at the ratio of 1:100 (10ml per litre, 800ppm). It is recommended to do test strip verification of diluted solutions to ensure desired concentration.
GOOD PRACTICE
Under Good Practise Protocol, based on accepted international research, a 0.5% solution of this product, diluted with potable water, is recommended with liberal application on clean hard surfaces, with a minimum contact time of 10 minutes. At this concentration the product provides 400ppm.
Datasheet
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
K4 U/C Sanitiser – 2 ltr
SKU: KK4
$ 109.52
8 in stock
Description
Ultra Concentrate.
No rinse surface sanitiser for food processing and food service sectors. Designed to be either diluted through dilution control equipment or via the use of a multi-dose wall mounted unit.
DIRECTIONS
Before sanitising ensure all surface are cleaned with suitable detergent. Dilute with cold potable water into a clean applicator bottle.
No-rinse application:
This product may be used as a no-rinse sanitiser on clean hard surfaces. Before use, all edible product and packaging material must be removed from the room or carefully protected. After use, a rinse with potable water is not required but food contact surfaces must be thoroughly drained / dried to minimise residues. For hard surfaces and equipment to ensure 300ppm use at the ratio of 1:250 (4ml per litre). Apply by spray or clean cloth, Allow contact time of minimum 10 minutes.
Rinse applications:
Use at the ratio of 1:200 (5ml per litre, 400ppm). Apply in a manner that avoids food contamination. Allow contact time of 10 minutes minimum then rinse with clean, potable water.
Foot bath:
Dilute at the ratio of 1:100 (10ml per litre, 800ppm). It is recommended to do test strip verification of diluted solutions to ensure desired concentration.
GOOD PRACTICE
Under Good Practise Protocol, based on accepted international research, a 0.5% solution of this product, diluted with potable water, is recommended with liberal application on clean hard surfaces, with a minimum contact time of 10 minutes. At this concentration the product provides 400ppm.
