Description

MS 165 is a formulated combination of wetting agents, penetrating agents, emulsifiers and solvents designed to provide an economical, effective and safe degreasing system, particularly suitable for automotive components. It is not suitable for heavy carbon removal. MS 165 is NZFSA C12 approved (All animal product except dairy). When used in meat, game and fish processing areas, remove all edible products prior to use. Do not return edible products until all solvent smells have dissipated. Any contact with food surfaces must be washed clean with potable water so that no residue remains.

CHEMICAL & PHYSICAL PROPERTIES

 Appearance: Thin, Colourless Liquid 

 Specific Gravity: 0.81 

 Flammable 

 Solubility in Water: Emulsifies 

APPLICATION

Automobile, motorcycle and all mechanical degreasing, preservative wax removal, industrial equipment degreasing, removal of heavy grease and oil, contaminated concrete floors (not suitable for cleaning tar seal or asphalt directly but tar off substrates).

A solvent in ultrasonic cleaning machines, cleaning off and dissolving tar or bitumen and typewriter cleaning. For degreasing operations which cannot be followed by a water rinse, i.e. electrical components, Electrosol is recommended.

METHOD OF USE

The product can be used either for spray, brush-on application or in a tank for soak cleaning.

 Spray or Brush-On: MS 165 is applied liberally to parts to be cleaned and allowed to stand for about five (5) minutes. The article is then hosed down with a strong jet of water.

 Tank Application: The article is allowed to soak for at least fifteen (15) minutes (overnight can be an advantage). It is then removed, drained and hosed off with a jet of water. Avoid adding water to the soak tank from the hose and cover with a rain proof lid if the tank is sited in the open. Some water intake is tolerated but too much will spoil the product’s cleaning characteristics.

 Preservative Wax Removal: 

(i) Ensure that the surface to be de-waxed is dry and cool. Do not use in direct sunlight or on hot paintwork –

(ii) Apply liberally to the wax and dirt surface by spray to avoid scratch marks on the paint. Allow to stand for 5-10 minutes.

(iii) Rinse off using a jet of water.

(iv) Dry the vehicle.

(v) Clean up any remaining wax by repeating above procedure or using a clean swab soaked in MS 165 for extra agitation.

(vi) Rinse off using a jet of water.